HOW TO USE AND CARE FOR YOUR NEW MAGNETIC VEHICLE SIGNS
Preparation For Installation
The vehicle surface and the brown, magnetic side
of the sign should be cleaned and dried prior to
applying.
Installation
Make contact on one edge of the sign to the vehicle
surface in desired location. Then, let the adjacent
part of the sign contact the vehicle surface until
entire sign is held magnetically to the vehicle.
If sign is not in desired position, remove and repeat
process. (DO NOT try to straighten sign by pulling
when it is held magnetically to the vehicle. This
might scratch your vehicle. )
Avoid placing your sign over chrome trim or surface
protrusions of any kind.
The temperature of the sign should be at least 60ºF
during installation. The temperature of the vehicle
does not matter.
Caution
Magnetic vehicle signs will not adhere to areas
on your car where plastic body fillers have been
used. In order to avoid losing your signs, use caution
in applying vehicle signs to areas of your car that
have been damaged.
Maintenance
Your signs should be periodically removed - once
a week minimum. Wipe dry both the vehicle and the
back of the sign. Trapped moisture, dirt or chemicals
may harm your vehicle finish. Clean your sign with
plain water or warm water and a mild detergent.
Storage
To avoid cracking or breaking, do not fold or crease.
Store your magnetic sign flat.